** The UTB feature is not supported on the initial AP-635 hardware, and will be phased in after release<\/p><\/td><\/tr><\/tbody><\/table>
Wi-Fi antennas<\/th><\/tr>
AP-635: Integrated downtilt omni-directional antennas for 2x2 MIMO with peak antenna gain of 4.6 dBi in 2.4 GHz, 7.0 dBi in 5 GHz and 6.3 dBi in 6 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 to 40 degrees.
Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the combined, average pattern is 2.9 dBi in 2.4 GHz, 4.9 dBi in 5 GHz and 4.3 dBi in 6 GHz.<\/li><\/ul><\/li><\/ul><\/td><\/tr><\/tbody><\/table>
Other interfaces and features<\/th><\/tr>
E0, E1: Two Ethernet wired network ports (RJ-45)
Auto-sensing link speed (100/1000/2500BASE-T) and MDI/MDX<\/li>
2.5 Gbps speed complies with NBase-T and 802.3bz specifications<\/li>
PoE-PD: 48Vdc (nominal) 802.3at/bt PoE (class 4 or higher)<\/li>
802.3az Energy Efficient Ethernet (EEE)<\/li>
Link aggregation (LACP) support between both network ports for redundancy and increased capacity<\/li><\/ul><\/li>
\u2002DC power interface: 12Vdc (nominal, +/- 5%), accepts 2.1mm/5.5mm center-positive circular plug with 9.5mm length<\/li>
\u2002USB 2.0 host interface (Type A connector)
Capable of sourcing up to 1A/5W to an attached device<\/li><\/ul><\/li>
Bluetooth Low Energy (BLE5.0) and Zigbee (802.15.4) radio
BLE: up to 5 dBm transmit power (class 1) and -100 dBm receive sensitivity (125 kbps)<\/li>
Zigbee: up to 5 dBm transmit power and -97 dBm receive sensitivity (250 kbps)<\/li>
Integrated omnidirectional antenna with roughly 30 to 40 degrees downtilt and peak gain of 3.0 dBi<\/li><\/ul><\/li>
Advanced IoT Coexistence (AIC) allows concurrent operation of multiple radios in the 2.4 GHz band<\/li>
Built-in Trusted Platform Module (TPM) for enhanced security and anti-counterfeiting<\/li>
Visual indicators (four multi-color LEDs): for System (1x) and Radio (3x) status<\/li>
Reset button: factory reset, LED mode control (normal/off)<\/li>
Serial console interface (proprietary, micro-B USB physical jack)<\/li>
Kensington security slot<\/li>
Automatic thermal shutdown and recovery function<\/li><\/ul><\/td><\/tr><\/tbody><\/table>
Power sources and power consumption<\/th><\/tr>
The AP supports direct DC power and Power over Ethernet (PoE) on port E0 and/or E1<\/li>
When both DC and PoE power sources are available, DC power takes priority over PoE<\/li>
When PoE power is supplied to both Ethernet ports, either port can be configured as the active power source<\/li>
Inactive/standby PoE power sources can be used to deliver hitless failover<\/li>
Power sources are sold separately; see the 630 Series Ordering Guide for details<\/li>
When powered by DC or 802.3bt (class 5) PoE, the AP will operate without restrictions.<\/li>
When powered by 802.3at (class 4) PoE with the IPM feature disabled, the AP will disable the USB port.<\/li>
Operating the AP with an 802.3af (class 3 or lower) POE source is not supported.<\/li>
With IPM enabled, the AP will start up in unrestricted mode but may dynamically apply restrictions depending on the available power budget and actual consumption. The feature restrictions and order in which these get applied are configurable.<\/li>
\u2002Maximum (worst-case) power consumption (without/with a USB device attached):
DC powered: 20.7W/26.4W.<\/li>
PoE powered: 23.8W/29.4W<\/li>
This assumes that up to 5W is supplied to the attached USB device.<\/li><\/ul><\/li>
Maximum (worst-case) power consumption in idle mode: 8.7W/14.2W (DC) or 11.7W/17.2W (PoE).<\/li>
Maximum (worst-case) power consumption in deep-sleep mode: 1.1W (DC) or 1.9W (PoE).<\/li><\/ul><\/td><\/tr><\/tbody><\/table>
Mounting details<\/th><\/tr>
A mounting bracket has been pre-installed on the back of the AP. This bracket is used to secure the AP to any of the mount kits (sold separately); see the 630 Series Ordering Guide for details.<\/td><\/tr><\/tbody><\/table>
Mechanical specifications<\/th><\/tr>
Dimensions/weight (AP-635; unit without mount bracket):
AP is plenum rated for use in air-handling spaces<\/li><\/ul><\/li>
Storage conditions
Temperature: -25C to +55C / +13F to +131F<\/li>
Relative humidity: 10% to 100%<\/li>
ETS 300 019 class 1.2 environments<\/li><\/ul><\/li>
Transportation conditions
Temperature: -40C to +70C/-40F to +158F<\/li>
Relative humidity: up to 95%<\/li>
ETS 300 019 class 2.3 environments<\/li><\/ul><\/li><\/ul><\/td><\/tr><\/tbody><\/table><\/div>","short_description":"
AP type: Indoor, tri radio, 2.4GHz, 5GHz and 6GHz (concurrent) 802.11ax 2x2 MIMO<\/li>
2.4 GHz radio: Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate with 2SS HE40 802.11ax client devices<\/li>
5 GHz radio: Two spatial stream Single User (SU) MIMO for up to 1.2 Gbps wireless data rate with 2SS HE80 802.11ax client devices<\/li>
6 GHz radio: Two spatial stream Single User (SU) MIMO for up to 2.4 Gbps wireless data rate with 2SS HE160 802.11ax client devices Up to 512 associated client devices per radio, and up to 16 BSSIDs per radio (limited to 4 for the 6GHz radio)<\/li>
Supported frequency bands (country-specific restrictions apply):
2.400 to 2.4835 GHz ISM<\/li>
5.150 to 5.250 GHz U-NII-1<\/li>
5.250 to 5.350 GHz U-NII-2<\/li>
5.470 to 5.725 GHz U-NII-2E<\/li>
5.725 to 5.850 GHz U-NII-3/ISM<\/li>
5.850 to 5.895 GHz U-NII-4<\/li>
5.925 to 6.425 GHz U-NII-5<\/li>
6.425 to 6.525 GHz U-NII-6<\/li>
6.525 to 6.875 GHz U-NII-7<\/li>
6.875 to 7.125 GHz U-NII-8<\/li><\/ul><\/li><\/ul><\/div>","has_variant_price":false,"has_variants":false,"is_out_of_stock":false,"label_price":258963,"selling_price":258963,"starts_with":258963,"ends_with":258963,"on_sale":false,"is_returnable":true,"is_stock_managed":false,"documents":[{"document_id":"2033769000000277804","name":"aruba-630-ap (1).png","is_featured":false,"attachment_order":0,"alter_text":"Aruba 635 Access Points"}],"images":[{"id":"2033769000000277804","url":"/product-images/aruba-630-ap+%281%29.png/2033769000000277804","title":"Aruba 635 Access Points","alternate_text":"Aruba 635 Access Points","order":1,"is_featured":false,"is_placeholder_image":false}],"attributes":[],"seo":{"description":"AP type: Indoor, tri radio, 2.4GHz, 5GHz and 6GHz (concurrent) 802.11ax 2x2 MIMO 2.4 GHz radio: Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate with 2SS HE40 802.11ax client devices 5 GHz radio: Two spatial stream Single User (SU) MIMO for up to 1.2 Gbps wireless data rate with 2SS HE80 802 ","keyword":"","title":"Aruba 635 Access Points"},"specification_group":[],"variants":[{"variant_id":"2033769000000277760","options":[],"stock_available":30,"double_stock_available":30,"is_out_of_stock":false,"is_returnable":false,"selling_price":258963,"label_price":258963,"sku":"","isbn":"","mpn":"","upc":"","ean":"","price_brackets":[],"images":[{"id":"2033769000000277804","url":"/product-images/aruba-630-ap+%281%29.png/2033769000000277804","title":"Aruba 635 Access Points","alternate_text":"Aruba 635 Access Points","order":1,"is_featured":false,"is_placeholder_image":false}],"custom_fields":[{"customfield_id":"2033769000000041001","field_type":"string","label":"Get A Qoute","value":"true","values":[],"display_value":"true","options":[],"edit_on_store":false,"index":0,"is_mandatory":false,"is_enabled":true,"show_in_storefront":true,"show_in_pdf":false}],"is_available_for_purchase":true,"is_deliverable":true}],"tags":[],"bread_crumbs":[{"name":"Aruba 635 Access Points","url":"/products/aruba-635-access-points/2033769000000277762","is_selected":false}],"review_id":"22207000000466853","is_social_share_enabled":true,"social_share_options":{"align":"right","style":"05","show_count":"true"},"is_product_custom_fields_enabled":true,"is_product_review_enabled":false,"is_product_price_brackets_available":false,"is_input_custom_field_available":false,"unit":"","is_available_for_purchase":true,"is_deliverable":true,"embed_js_url":"https://ecommerce-stratus.zohostratus.in/IDC/js/zstore-embed.js","embed_css_url":"https://ecommerce-stratus.zohostratus.in/IDC/css/zstore-embed.css"};window.zs_resource_url='/products/aruba-635-access-points/2033769000000277762';window.zs_site_resource_id = "22207000000002016";
AP type: Indoor, tri radio, 2.4GHz, 5GHz and 6GHz (concurrent) 802.11ax 2x2 MIMO
2.4 GHz radio: Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate with 2SS HE40 802.11ax client devices
5 GHz radio: Two spatial stream Single User (SU) MIMO for up to 1.2 Gbps wireless data rate with 2SS HE80 802.11ax client devices
6 GHz radio: Two spatial stream Single User (SU) MIMO for up to 2.4 Gbps wireless data rate with 2SS HE160 802.11ax client devices Up to 512 associated client devices per radio, and up to 16 BSSIDs per radio (limited to 4 for the 6GHz radio)
Supported frequency bands (country-specific restrictions apply):
2.400 to 2.4835 GHz ISM
5.150 to 5.250 GHz U-NII-1
5.250 to 5.350 GHz U-NII-2
5.470 to 5.725 GHz U-NII-2E
5.725 to 5.850 GHz U-NII-3/ISM
5.850 to 5.895 GHz U-NII-4
5.925 to 6.425 GHz U-NII-5
6.425 to 6.525 GHz U-NII-6
6.525 to 6.875 GHz U-NII-7
6.875 to 7.125 GHz U-NII-8
Rs.258,963.00
Quote Request
Customize
Get A Qoute
true
Product Details
Product Details
Product Details
Available bands and channels: Dependent on configured regulatory domain (country)
Dynamic frequency selection (DFS) optimizes the use of available RF spectrum in the 5 GHz band
802.11ac very high throughput (VHT) support: VHT20/40/80
802.11ax high efficiency (HE) support: HE20/40/80/160
Supported data rates (Mbps):
802.11b: 1, 2, 5.5, 11
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40), 400 with 256-QAM (proprietary extension)
802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT80); 1,083 with 1024-QAM (MCS10 and MCS11, proprietary extension)
802.11ax (2.4GHz): 3.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)
802.11ax (5GHz): 3.6 to 1,201 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE80)
802.11ax (6GHz): 3.6 to 2,402 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE160); 2,882 with 4096-QAM (MCS12 and MCS13, proprietary extension)
802.11n/ac packet aggregation: A-MPDU, A-MSDU
Transmit power: Configurable in increments of 0.5 dBm
Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):
Per radio/band (2.4 GHz/5 GHz/6 GHz): +21 dBm (18 dBm per chain)
Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain.
Advanced Cellular Coexistence (ACC) minimizes the impact of interference from cellular networks
Ultra Tri-Band (UTB) enables ultimate flexibility in 5 GHz and 6 GHz channel selection without performance degradation*
Maximum ratio combining (MRC) for improved receiver performance
Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
Space-time block coding (STBC) for increased range and improved reception
Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
Transmit beam-forming (TxBF) for increased signal reliability and range
802.11ax Target Wait Time (TWT) to support low-power client devices
** The UTB feature is not supported on the initial AP-635 hardware, and will be phased in after release
Wi-Fi antennas
AP-635: Integrated downtilt omni-directional antennas for 2x2 MIMO with peak antenna gain of 4.6 dBi in 2.4 GHz, 7.0 dBi in 5 GHz and 6.3 dBi in 6 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 to 40 degrees.
Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the combined, average pattern is 2.9 dBi in 2.4 GHz, 4.9 dBi in 5 GHz and 4.3 dBi in 6 GHz.
Other interfaces and features
E0, E1: Two Ethernet wired network ports (RJ-45)
Auto-sensing link speed (100/1000/2500BASE-T) and MDI/MDX
2.5 Gbps speed complies with NBase-T and 802.3bz specifications
PoE-PD: 48Vdc (nominal) 802.3at/bt PoE (class 4 or higher)
802.3az Energy Efficient Ethernet (EEE)
Link aggregation (LACP) support between both network ports for redundancy and increased capacity
DC power interface: 12Vdc (nominal, +/- 5%), accepts 2.1mm/5.5mm center-positive circular plug with 9.5mm length
USB 2.0 host interface (Type A connector)
Capable of sourcing up to 1A/5W to an attached device
Bluetooth Low Energy (BLE5.0) and Zigbee (802.15.4) radio
BLE: up to 5 dBm transmit power (class 1) and -100 dBm receive sensitivity (125 kbps)
Zigbee: up to 5 dBm transmit power and -97 dBm receive sensitivity (250 kbps)
Integrated omnidirectional antenna with roughly 30 to 40 degrees downtilt and peak gain of 3.0 dBi
Advanced IoT Coexistence (AIC) allows concurrent operation of multiple radios in the 2.4 GHz band
Built-in Trusted Platform Module (TPM) for enhanced security and anti-counterfeiting
Visual indicators (four multi-color LEDs): for System (1x) and Radio (3x) status
Reset button: factory reset, LED mode control (normal/off)
Serial console interface (proprietary, micro-B USB physical jack)
Kensington security slot
Automatic thermal shutdown and recovery function
Power sources and power consumption
The AP supports direct DC power and Power over Ethernet (PoE) on port E0 and/or E1
When both DC and PoE power sources are available, DC power takes priority over PoE
When PoE power is supplied to both Ethernet ports, either port can be configured as the active power source
Inactive/standby PoE power sources can be used to deliver hitless failover
Power sources are sold separately; see the 630 Series Ordering Guide for details
When powered by DC or 802.3bt (class 5) PoE, the AP will operate without restrictions.
When powered by 802.3at (class 4) PoE with the IPM feature disabled, the AP will disable the USB port.
Operating the AP with an 802.3af (class 3 or lower) POE source is not supported.
With IPM enabled, the AP will start up in unrestricted mode but may dynamically apply restrictions depending on the available power budget and actual consumption. The feature restrictions and order in which these get applied are configurable.
Maximum (worst-case) power consumption (without/with a USB device attached):
DC powered: 20.7W/26.4W.
PoE powered: 23.8W/29.4W
This assumes that up to 5W is supplied to the attached USB device.
Maximum (worst-case) power consumption in idle mode: 8.7W/14.2W (DC) or 11.7W/17.2W (PoE).
Maximum (worst-case) power consumption in deep-sleep mode: 1.1W (DC) or 1.9W (PoE).
Mounting details
A mounting bracket has been pre-installed on the back of the AP. This bracket is used to secure the AP to any of the mount kits (sold separately); see the 630 Series Ordering Guide for details.
Mechanical specifications
Dimensions/weight (AP-635; unit without mount bracket):
220mm (W) x 220mm (D) x 51mm (H)
1300g
Dimensions/weight (AP-635; shipping):
250mm (W) x 240mm (D) x 85mm (H)
1650g
Environmental specifications
Operating conditions
Temperature: 0C to +50C / +32F to +122F
Relative humidity: 5% to 95%
ETS 300 019 class 3.2 environments
AP is plenum rated for use in air-handling spaces
Storage conditions
Temperature: -25C to +55C / +13F to +131F
Relative humidity: 10% to 100%
ETS 300 019 class 1.2 environments
Transportation conditions
Temperature: -40C to +70C/-40F to +158F
Relative humidity: up to 95%
ETS 300 019 class 2.3 environments
Items have been added to cart.
One or more items could not be added to cart due to certain restrictions.